Eneo GLC-1601 Istruzioni per gli Interventi Scaricare il pdf (Pagina 6)

1. Lens Mount: This IP camera is used with either C or CS mount lens.

2. DIP Switch:

1. AES: Auto electric shutter

2. DC IRIS: Use auto iris (DC drive)

3. DHCP: Turn On / Turn Off use DHCP protocol. If the switch points upwards, the device can

change the setup of network function (enable/disable) via the network.

4. STATIC IP: If the switch points down, the device can’t obtain an IP address from the DHCP

server. This option is needed to conﬁgure the network communication settings.

3.2 Flank Panel

Right Flank Panel

Left Flank Panel

3. ALARM I/O: This is a 6-PIN connector including the ALARM IN/OUT, ALARM RESET and GROUND items for

connecting with external devices.

• RS-485 pin: D+

• RS-485 pin: D-

• GND: Ground Contact

• ALARM IN (INPUT): This is an alarm input which can be programmed in the menu system to

Normally Open or Normally Closed. (

0V(Active)

)

• ALARM OUT (OUTPUT): This is an alarm-output trigger. Connect this to external devices such as buzzers or

lights. (

0V(Active)

)

• ALARM RST (RESET): This pin connects to an alarm-clear device for clearing an alarm. (

0V(Active)

)

4. RESET: Recover to factory default.

5 pin MINI USB Port: The user can use a USB device cable to connect the IP camera to the USB port on the PC.

6. ALC VR: Iris control VR

When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different lighting environments.

Adjust the VR clock-wise to open the iris and counter-clockwise to close the iris of the camera.

7. IRIS: Auto iris connector

This camera works with a DC drive auto iris lens. Please refer to the pin assignment marked on the camera

when connecting the auto iris lens.

1 2 3 4 5 6 7 8 9 10 11 ... 103 104

Nessun commento

Eneo GLC-1601 Istruzioni per gli Interventi Pagina 6